Plastic Fermenter with Spigot - 6 Gallon

  Related Products


  6 Gallon Plastic Fermenter - Made from food grade HDPE with a 6 gallon capacity. Comes complete with lid grommeted for an airlock.
  Springless 3/8" Bottle Filler - The springless bottle filler uses gravity to fill bottles when depressed on the bottom of the bottle. It takes a 5/16" or 3/8" hose.
  Food Grade Vinyl Hose 3/8" ID - 3/8" ID food grade vinyl hose. Sold by the foot.
  6 Gallon Plastic Bucket Lid - This is the replacement lid for our 6 gallon plastic fermenters. You can have it grommeted for an airlock as an option.
  Spring Tip 3/8" Bottle Filler - This bottle filler uses a spring tip to fill bottles. When depressed on the bottom of a bottle, it allows fluid to flow, filling the bottle. It is designed to fit either a 5/16" or 3/8" hose.
  Grommet - The grommet is used to make a tight seal in the lid of a fermenter for an airlock. It fits a 1/2" hole.
  Plastic Spigot for 3/8" Hose - Make a bottling bucket, add a spigot to your fermenter! A 1" hole is required for installation. Comes with nut and 2 washers. The spigot is made to fit a 5/16" or 3/8" hose.

 Other Items from Bottling Equipment

  Combination Bottle Filler - The Combination Bottle Filler has the option of using either a spring tip or a springless tip for bottle filling. Takes a 3/8" ID hose.
  Plastic Fermenter with Spigot - 6 Gallon - Our 6 gallon fermenter comes installed with a spigot that takes a 3/8" ID hose. It can be used as either a bottling bucket or primary fermenter.
  Screw Cap 28mm - 28mm plastic re-usable screw cap. Fits our 375ml screw cap wine bottles.
  Small Plastic Hose Clamp - A small plastic hose clamp designed to fit 5/16" or smaller hose.
  Bottle Caps Green - Green bottle caps. Approximately 100 per package.
  Plastic Spigot for 3/8" Hose - Make a bottling bucket, add a spigot to your fermenter! A 1" hole is required for installation. Comes with nut and 2 washers. The spigot is made to fit a 5/16" or 3/8" hose.
  Bottle Caps Gold - Gold bottle caps. Approximately 100 per package.
  Bottle Caps Blue - Blue bottle caps. Approximately 100 per package.
  Screw Cap 38mm - 38mm Plastic re-usable screw cap. Fits our gallon and 1/2 gallon jugs.
  The Beer Gun Accessory Kit - This optional accessory kit provides everything you need to get your BeerGun up and running! A liquid ball-lock disconnect, a 5ft length of hose for your CO2 line with 1/4" stainless flare connectors on each end, one stainless 1/4" disconnect and stainless clamp (for the 10ft beer hose that comes with the BeerGun), and a brass 1/4" NPT X 1/4" flare adapter for connecting to the CO2 valve on the BeerGun. Requires a spare CO2 port and shutoff valve on your regulator.
  Bottle Tree Attachable Wheels - These wheels attach to the bottom of our Bottle Trees and make transporting a full tree much easier and safer.