Large brown beer bottles that will hold 22oz! Takes a standard bottle cap. 12 per case.
|
Make cleaning your carboys a lot easier with a carboy brush. The angled brush helps clean in those hard to reach areas.
|
The twin chamber airlock has two chambers which fill with water to allow the Co2 gas to escape while keeping outside air out.
|
3/8" ID food grade vinyl hose. Sold by the foot.
|
|
This handheld bottle capper works great for bottling you favorite beverage! Works on all standard beer bottles. It has a magnetic center to hold the cap in place while bottling.
|
6 gallon glass carboys are excellent primary and secondary fermenters. We recommend using a small universal stopper.
|
|
With the bottle brush and a little elbow grease, you'll have those bottles clean in no time!
|
The center piece of this airlock floats up and down to allow Co2 pressure to escape during fermentation. Comes apart for easy cleaning.
|
Designed to fit 5/16" or 3/8" hose.
|
The Plastic Hydrometer Test Jar is used for taking hydrometer readings.
|
|
|
The floating thermometer is great for taking temperatures in the mash kettle. It floats and reads from 0-220F and -20 to 110C.
|
This bottle filler uses a spring tip to fill bottles. When depressed on the bottom of a bottle, it allows fluid to flow, filling the bottle. It is designed to fit either a 5/16" or 3/8" hose.
|
Universal Stoppers fit several size holes. See chart below for specific dimensions.
|
|
Gold bottle caps. Approximately 100 per package.
|
This funnel has a 8" diameter and is great for carboys.
|
Hydrometers are used throughout the fermentation process. They measure density of fluid and are how you determine alcohol content. Our hydrometers read in 3 scales: Specific Gravity, Balling (brix), and Potential Alcohol %.
|
A small plastic hose clamp designed to fit 5/16" or smaller hose.
|
The Five Star Cleaning Kit comes with 9 - 2oz packages of PBW, 1 - 8oz Star San Sanitizer and complete instructions on proper use and application of both products.
|
5 gallon carboys are excellent primary and secondary fermenters. We recommend using a small universal stopper.
|
This is a 18" plastic brewing spoon that can withstand boiling temperatures.
|
Our 6 gallon fermenter comes installed with a spigot that takes a 3/8" ID hose. It can be used as either a bottling bucket or primary fermenter.
| | |