This tip is designed for the 1/2" Auto Siphon and Racking Canes. The slats on the side allow you to siphon every last drop out of the fermenter.
|
Designed to fit 1/2" hose for faster flow!
|
Designed to fit 5/16" or 3/8" hose.
|
This is the replacement inner siphon cane with plunger tip for the 1/2" Auto Siphon.
|
This is the replacement inner siphon cane with plunger tip for the 3/8" Auto Siphon.
|
The bucket clamp attaches to the side of a bucket to secure the racking cane in place.
|
1" ID food grade vinyl hose. Sold by the foot.
|
1/2" ID food grade vinyl hose. Sold by the foot.
|
1/4" ID food grade vinyl hose. Sold by the foot.
|
3/8" ID food grade vinyl hose. Sold by the foot.
|
5/16" ID food grade vinyl hose. Sold by the foot.
|
The slant funnel measures 10" wide. The slant feature prevents splashing.
|
The 8" slant funnel is great for carboys. The slant feature prevents splashing. This funnel also comes with a course screen to help filter out large particles.
|
A small funnel measuring 4.5" in diameter. It works well for pouring liquids into bottles.
|
|
A large hose clamp designed to fit 3/8" to 1/2" hose.
|
Make a bottling bucket, add a spigot to your fermenter! A 1" hole is required for installation. Comes with nut and 2 washers. The spigot is made to fit a 5/16" or 3/8" hose.
|
Clear Acrylic Racking cane 30" in length. Takes 1/2" ID hose.
|
Clear Acrylic Racking cane 24" in length. Takes 3/8" or 5/16" ID hose.
|
Clear Acrylic Racking cane 30" in length. Takes 3/8" or 5/16" ID hose.
|
These are replacement tips for 1/2" racking canes. Sediment tips help reduce the amount of sediment
|
These are replacement tips for 3/8" racking canes. Sediment tips help reduce the amount of sediment picked up during the siphon.
|
Stainless Steel Racking cane 24" in length. Takes 3/8" or 5/16" ID hose.
|
Stainless Steel Racking cane 30" in length. Takes 3/8" or 5/16" ID hose.
|
The carboy holder fits into the neck of a carboy and allows you to adjust the level of the racking cane. Great for reducing the amount of sediment in the transfer.
|
A small plastic hose clamp designed to fit 5/16" or smaller hose.
|
Stop Cocks are used to control in line flow of fluids. This is made for a 1/2" hose.
|
Stop Cocks are used to control in line flow of fluids. This is made for a 1/4" hose.
|
Stop Cocks are used to control in line flow of fluids. This is made for a 3/8" hose.
| |